Author Topic: New standing rigging H54 #28  (Read 553 times)

0 Members and 1 Guest are viewing this topic.


  • Newbie
  • *
  • Posts: 32
Re: New standing rigging H54 #28
« Reply #3 on: October 19, 2021, 10:53:54 PM »

We had our standing rigging done about 3 years ago on Bacchus (Formerly L'ame Libre), H54 #22, which is a 2001 boat.  We had to remove the mast due to a lighting strike and took that opportunity to change the rigging, as we were approaching 20 years.  Brad Storm did the work.  He is the very best.  He did the original rigging back in 2001 and probably did yours in 2003. 

He was going into semi retirement, so I don't know if he is still available, but any rigging questions, I would start with him.

Best Wishes

Scott Johnson
SV Bacchus - H54 #22


  • Sr. Member
  • ****
  • Posts: 438
Re: New standing rigging H54 #28
« Reply #2 on: October 15, 2021, 10:35:23 AM »
Your post got cut off. Selden can supply new rigging. They just need the serial number at the base of the mast. Or any good rigger can make new rigging.


  • Newbie
  • *
  • Posts: 39
New standing rigging H54 #28
« Reply #1 on: October 14, 2021, 10:19:54 PM »
I think I need to replace the rigging on my H54 hull 28 built in 2003. The rigging does show a little bit of rust at the base. It


If you wish to help keep the HYOA running, please click the donation button below