Author Topic: Anyone replaced standing rigging at berth?  (Read 679 times)

0 Members and 1 Guest are viewing this topic.


  • Jr. Member
  • **
  • Posts: 62
Anyone replaced standing rigging at berth?
« Reply #1 on: December 03, 2020, 05:12:39 PM »
I had a 41' ketch (south east asia) and replaced all standing rigging (one at a time) norseman fitting with hacksaw. Anyone done the same with a Hylas 46 or equivalent? Thanks in advance!

Also, is your rigging wire 12mm & 10mm. I've also had a problem finding wire 316 1x19x12mm made in the USA. Any help would be appreciated. ;)

Windswept is Hylas 46 #028


If you wish to help keep the HYOA running, please click the donation button below